[EcoBus.] MB1114. Bi-Carburation

Afin d'évaluer votre projet ou bien étudier votre question, soyez précis dans votre question et/ou projet. Ensuite, soit que votre post sera ensuite dirigé dans la rubrique adéquate, soit qu'il vous sera indiqué le lien déjà existant pour poursuivre la réflexion.
ATTENTION : SI INACTIF PENDANT 60 JOURS, LE POST SERA SUPPRIME AUTOMATIQUEMENT.

Modérateur : Les modérateurs

Répondre
Avatar du membre
Macromalhuile37
Modérateur
Modérateur
Messages : 12299
Enregistré le : sam. sept. 10, 2005 7:46 pm
Localisation : petite suisse tourangelle

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par Macromalhuile37 »

Some of us have run a long time whith those valves....But several of us had Problems whith them...leak and burned solenoid ...For mee this product have not it's place on a bus because of the fire risk....

Buy manual ones if your are short in budget...They wont set the bus on fire...
Image
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

Macromalhuile37 a écrit :Some of us have run a long time whith those valves....But several of us had Problems whith them...leak and burned solenoid ...For mee this product have not it's place on a bus because of the fire risk....

Buy manual ones if your are short in budget...They wont set the bus on fire...
And why is the place for a car?
Do you know better ones?


What about this ones:
http://www.wvodesigns.com/raw-power-3-p ... valve.html

If not, i put manual ones, but they will be far from the pump so it will
go on sucking the liquid it has for a couple of seconds because of the lenght
of the hose.


thankss
Modifié en dernier par AlmaSana le sam. janv. 28, 2017 3:39 am, modifié 1 fois.
Avatar du membre
joumpy
Modérateur
Modérateur
Messages : 3959
Enregistré le : jeu. nov. 24, 2005 10:41 am
Localisation : Grenoble
Contact :

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par joumpy »

Hi Alma,
these ones will do the job
just make sure you can get fittings corresponding to the port threads
god bless
Le plaisir n'est rien si par la même occasion il n'emmerde pas quelqu'un d'autre :o
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

joumpy a écrit :Hi Alma,
these ones will do the job
just make sure you can get fittings corresponding to the port threads
god bless
the chinnese ones or this ones?
http://www.wvodesigns.com/raw-power-3-p ... valve.html
Avatar du membre
joumpy
Modérateur
Modérateur
Messages : 3959
Enregistré le : jeu. nov. 24, 2005 10:41 am
Localisation : Grenoble
Contact :

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par joumpy »

the raw power ones... :D :D :D
Le plaisir n'est rien si par la même occasion il n'emmerde pas quelqu'un d'autre :o
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

Coming soon...
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

joumpy a écrit :Hi Alma,
Sometimes, the heat exchanger is not on the diesel circuit, but on the engine oil circuit: it is used to cool the engine oil down. Then it is close to the oil filtering element. Have a look this way.
If it is not possible to find such a heat exchanger, do not bother with new ones, build your own.
2 copper tubes Ø10 mm minimum internal 1 m long.
Wrap them with copper wire, heat up and use lead/tin solder.
1 tube for cooling fluid, the other for oil, flows in opposite direction.
Insulation around the assembly and you are good to go.
God bless
My fellow friend,
Valvs and his fittings arriving.
I want to build the exchanger and i know two ways to build them...

This one that you told me, i found where to buy the copper tubes.

And another one y saw in "El Gordos Frintagueros" land rover.
Its a copper 10mm tube all twisted inside a fire extinguisher.
The oil goes trough the copper line and the water goes trough the
fire extinguisher..

Or copper arround exhaust?


Wich one you think is better?!


love and peace
respect
Alma
Whatsapp: +5491161712110 if anyone wants to keep more in touch
I will go on posting here anything I lear about this case in this post..
Avatar du membre
joumpy
Modérateur
Modérateur
Messages : 3959
Enregistré le : jeu. nov. 24, 2005 10:41 am
Localisation : Grenoble
Contact :

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par joumpy »

Hi Alma,
Fire extinguisher will do but it is rather large.
Exhaust exchange can be a problem because the temperature of the exhaust is not under control.

God bless
Le plaisir n'est rien si par la même occasion il n'emmerde pas quelqu'un d'autre :o
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

joumpy a écrit :Hi Alma,
Fire extinguisher will do but it is rather large.
Exhaust exchange can be a problem because the temperature of the exhaust is not under control.

God bless
Thanks a lot!
Large because of the size? or time?
i have enough space :)

Getting ready for the frying smell
Avatar du membre
joumpy
Modérateur
Modérateur
Messages : 3959
Enregistré le : jeu. nov. 24, 2005 10:41 am
Localisation : Grenoble
Contact :

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par joumpy »

Hi Alma,
Because of the size, yes!
and therefore a long length of copper tube creating loss of pressure and a large amount of cooling fluid in the extinguisher bottle.
God bless
Le plaisir n'est rien si par la même occasion il n'emmerde pas quelqu'un d'autre :o
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

joumpy a écrit :Hi Alma,
Because of the size, yes!
and therefore a long length of copper tube creating loss of pressure and a large amount of cooling fluid in the extinguisher bottle.
God bless
you are the one..
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

My friends! LOOK who had arrived!
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

joumpy a écrit :Hi Alma,
Because of the size, yes!
and therefore a long length of copper tube creating loss of pressure and a large amount of cooling fluid in the extinguisher bottle.
God bless
What about adding a pump before the extinguisher? He told me he has one for the pressure..
I will use your method, but just want to know what you think about adding that pump.
Avatar du membre
joumpy
Modérateur
Modérateur
Messages : 3959
Enregistré le : jeu. nov. 24, 2005 10:41 am
Localisation : Grenoble
Contact :

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par joumpy »

For cars, we use fuel pumps costing about 20€.
For a bus, you need extra flow and the pump price goes up to 100€.
My point of view: only useful to run at low temperatures and/or thick oil mixtures (palm oil especially) with a good bi-carb system.
Le plaisir n'est rien si par la même occasion il n'emmerde pas quelqu'un d'autre :o
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

joumpy a écrit :For cars, we use fuel pumps costing about 20€.
For a bus, you need extra flow and the pump price goes up to 100€.
My point of view: only useful to run at low temperatures and/or thick oil mixtures (palm oil especially) with a good bi-carb system.
i have this pump
http://tecnica-mente.com.ar/imagenes/bo ... 43_144.jpg

And look what id bought.
almost near the first ride!
Vous n’avez pas les permissions nécessaires pour voir les fichiers joints à ce message.
Avatar du membre
madguss
Passionné
Passionné
Messages : 2521
Enregistré le : lun. juin 27, 2005 1:16 pm
Localisation : Angers

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par madguss »

Hi!

This pump is not meant to run more than 15 minutes. It will overheat. I use one of these for my filtration station and after 30 minutes, it is really very hot and I stop it. Maybe if you add some cooling fins and a fan it might do the job... have a try!
The other problem is that the pump's membrane is made with a kind of plastic which is good with vegetable oil, but will not resist to any fuel or petrol...

:)
Modifié en dernier par madguss le jeu. mai 11, 2017 1:01 pm, modifié 1 fois.
Zx écrabouillé par un camion: on passe au confort supérieur: La Xantia 1.9 TD
Kit bi-réservoir

Xantia explosée par une Twingo... Level up: la C5 HDI 2 L 140 CV

Mon post : http://www.oliomobile.org/viewtopic.php ... &start=260
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

madguss a écrit :Hi!

This pump is not meant to run more than 15 minutes. It will overheat. I use one of this for my filtration station and after 30 minutes, it is really very hot and I stop it. Maybe if you add some cooling fins and a fan it might do the job... have a try!
The other problem is that the pump's membrane is made with a kind of plastic which is good with vegetable oil, but will not resist to any fuel or petrol...

:)
it would only be for the vegetable oil.
thanks for the tips!
countdown..
Avatar du membre
joumpy
Modérateur
Modérateur
Messages : 3959
Enregistré le : jeu. nov. 24, 2005 10:41 am
Localisation : Grenoble
Contact :

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par joumpy »

This membrane pump ages badly with oil...
Only use it under your direct supervision or you will spill large amounts of oil!
Brand new, this pump costs about 100€ so better buy this:
http://www.aircraftspruce.com/catalog/e ... oldflo.php
Le plaisir n'est rien si par la même occasion il n'emmerde pas quelqu'un d'autre :o
Avatar du membre
madguss
Passionné
Passionné
Messages : 2521
Enregistré le : lun. juin 27, 2005 1:16 pm
Localisation : Angers

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par madguss »

Btw, what is the difference between the 480543 and the 480534E ? It seems they have the same flow and same pressure! but not the same price...
Zx écrabouillé par un camion: on passe au confort supérieur: La Xantia 1.9 TD
Kit bi-réservoir

Xantia explosée par une Twingo... Level up: la C5 HDI 2 L 140 CV

Mon post : http://www.oliomobile.org/viewtopic.php ... &start=260
AlmaSana
Intéressé
Intéressé
Messages : 105
Enregistré le : jeu. mai 26, 2016 11:35 pm
Localisation : Argentina - Travelling the World

Re: [HELP-NEW] EcoBus. MB1114. Bi-Carburation

Message par AlmaSana »

My fellow friends.

I remember joumpy told me to take the injectors to 200 bar or vegetable oil use.
What about using diesel/gasoil with injectors at 200 bars?

Thanks
good bles
Répondre

Retourner vers « Exposez votre projet et/ou votre question ici »